Pallet Drink Coasters
Pallet drink coasters is bookmark about Furniture bookmarked by billy with ID 14142092619 was uploaded on 15-04-2019 and has been viewed 260,913 times.
LITTLE PALLETS What better project to make with free pallet wood than little pallets! This drink coasters are super easy to make using any scrap wood you happen to have.The only trick is to use thin wood so that the scale is fairly accurate.
The slats on most pallets are about a quarter inch thick.I suggest planing them down to 1/16″; I shaved mine down to about 1/8″ and they look a bit too thick.In the measured plans, I indicate 1/16″.
If you don't have a planer, you might look around in a craft store.Many carry small, thin pieces of wood.The other issue is the width of the slats.In the plans, I have them ripped to 3/8″ wide, which will yield nine for the top.
I cut mine a little wider, allowing for only eight slats.I experimented with narrower strips in order to fit eleven on top, like an actual pallet, but it was too difficult and the slats just looked odd.
Probably due to their thickness.If you are ambitious, you might use a couple different widths as is often the case on real pallets.I used my router to make curved notches in the bottom...