Easy To Make Wooden Wind Spinner
Easy to make wooden wind spinner is article about For Fun bookmarked by joe with ID 1382029313 was uploaded on 08-02-2019 and has been viewed 224,940 times.
This project was inspired by Carmen Salamone who sent over a picture of a neat little wind spinner he made out of cedar.I have seen these before: they seem to be common at craft fairs.I can understand why.
They are super easy to make and there is a lot of room for customization.They have a pretty good profit margin.WOODWORKING OPTIONS For mine, I used stock 3/4″ pine boards and ripped them into 3/4″ strips, which I then cut to various lengths.
This was all very simple on my table saw but if you don't have one, you might be able to find thin strips of wood at your local home center that will do the trick.You can cut them to length using a hand saw or jig saw.
The only other bit of woodworking involves drilling a hole through the center of each piece.I used my drill press to speed up the process and to ensure they were all centered, but you should be able to drill holes with a hand drill.
Mark the centers carefully so the finished spinner will be balanced.HARDWARE I used a length of 1/4″ threaded rod and attached an eye bolt to one...