Popsicle Stick Bench Fun And Colorful Diy Project
Popsicle stick bench fun and colorful diy project is article about Furniture bookmarked by dennis with ID 1452192405 was uploaded on 30-03-2019 and has been viewed 18,212 times.
This is a project I've been meaning to make for years, ever since I first spotted Disney's version in A Bug's Land at The California Adventure Park , where everything is scaled to appear as though you are the size of a bug.
This Popsicle stick bench is easy to make, but the angled back is a little tricky.I wanted the two supports to look like a Popsicle stick that was bent in the middle.The solution was a modified lap joint with 10 degree angles.
This worked out really well and is very strong.However, if it looks a little too much to tackle, I have included a limited-tools option in the plans that features a straight back.The only saw you will need is a jigsaw.
This project uses 2x4s, 1x4s and 2x2s.These board sizes are readily available at any home center so you won't need to rep them into narrower strips.I began by cutting the front legs to size.I made a template for marking the rounded ends of the 'Popsicle sticks' by drawing a circle the same width as a 2×4 (actual size: 3.
5' or 89mm) on a scrap of hardboard (Masonite).Then I cut it to size...