Drill Bit Storage Case
Drill bit storage case is post about For The Shop bookmarked by clayton with ID 12991250889 was uploaded on 09-01-2019 and has been viewed 82,076 times.
Over the years, I have accumulated a lot of drill bits.But they all come in their own plastic containers and seem to always have to search for the drill bit I need.I make a little travel-sized bit case a couple years ago, but decided it was finally time to deal with the bulk of my drill bits and make a full-sized drill bit storage case.
Additionally, I made a dedicated under-cabinet space to store the case.The case is a simple box.I cut a rabbet on both long edges of each side.These will hold the top and bottom of the box.I used my miter sled to cut 45 degree miters on the end of each board and glued them all together.
I clamped them using my strap clamp.While that was still drying, I cut two plywood panels and glued them into the rabbets.Once everything was dry, I separated the lid from the container section of the box using my tablesaw.
It's not a tricky procedure, but it helps to add some shims (cardboard) between the cut edges before making the next cut.For the fourth cut, the one that releases to two halves, I inserted the cardboard shims and taped the box...