Saturday Morning Workshop How To Build A Magnetic Knife Str*P
Saturday morning workshop how to build a magnetic knife str*p is post about Woodworking Projects bookmarked by sidney with ID 11470686291 was uploaded on 07-01-2019 and has been viewed 351,633 times.
Crosscut the board to length Crosscut the board to 11 in.on the miter saw.Round the edges of the board Use a router and a 1/8-in.round over bit to round the edges.Drill holes for magnets Mark a centerline on your board, along that line, mark every 2 in.
Set up a stop on your drill press so that it consistently drills along that centerline.Raise the drill press table so that the 1/2 in.Forstner bit drills 1/8 in.into the board.Drill into the board with your drill press.
Sand and stain the wood Sand the wood to a smooth state starting with 100-grit and continuing all the way to 320-grit sandpaper.Finish the wood to your liking.We used a clear, satin varnish.We stained the wood before adding the magnets because the finish can negatively affect the rare earth magnets.
Let dry.Insert the magnets Super glue the rare earth magnets into the holes.Be very careful with these magnets, they can easily attract to each other and break.Try as hard as you can to keep them separated.
Next, check out our favorite handy hints for the home cook...