How To Build A Murphy Bed Bookcase
How to build a murphy bed bookcase is article about Woodworking bookmarked by justin with ID 13841700141 was uploaded on 27-02-2019 and has been viewed 206,677 times.
How to Build a Murphy BedWhen William Lawrence Murphy filed patents for his space-saving bed in about 1900, he couldn't have known that he was solving a 21st-century problem: the need for a home office or hobby space, plus extra sleeping space for guests.
And although his invention has been improved over the last century, the basic idea is still brilliant.Building a Murphy bed requires some precision—you have to install the hardware exactly according to the instructions.
But the woodworking here is actually simpler than that required for many bookcases.There are no dadoes, mortises or tricky joinery.And all of the door frames are impostors.They look exactly like classic rail-and-stile frames, but they're just 1/4-in.
-thick solid wood applied to plywood.The bookcases that flank the bed are optional.Plus: Check out this other disappearing bed and bookshelf project by a Family Handyman reader.Designed to Pamper Your GuestsA Murphy bed can be super simple: Some are just an upright box that contains a folddown bed.
But this is a deluxe version.Aside from the handsome design and storage spaces, I included some convenience features to make guests comfortable: On both sides of the bed, there are pullout tables mounted on drawer slides.
Inside the side cabinets, there are display lights that can also act as night-lights.On the headboard, I mounted a touch kn*b so guests could switch on lights above the bed—no groping for a light switch in a dark, unfamiliar room.
Pullout tabletops function like nightstands - the perfect spot to set a book or a cup of bedtime tea.Lights and switches built into the side cabinets aren't just decorative; they can act as night-lights for guests.
Just touch a kn*b on the headboard to operate the dimmable reading lights above the bed.Murphy Bed HardwareHardware kits include folding legs that support the foot of the bed, pivots that allow the bed to swing down and, most important, gas pistons that operate like the pistons on a hatchback, lifting most of the weight of the bed when you close it.
There are lots of online sources for Murphy bed hardware.I ordered mine ($375) from rockler.com and was impressed with both the quality of the hardware and the detailed instructions.Twin-, full- and queen-size kits are available.
Aside from the hardware, I spent about $115 on lighting kits designed especially for Murphy beds and bookcases.Before you Build a Murphy BedDon't begin this project until you have the Murphy bed hardware on hand—you may have to alter my design slightly to suit different hardware.
Also be sure the room and furniture will accommodate the bed.As built, my bed protrudes 80 in.from the wall.Most of the materials you'll need are available at home centers.The exceptions are the Murphy bed hardware and 1/4-in.
-thick solid oak.You can order 1/4-in.hardwood online (walllumber.com is one source) or 'resaw' thicker boards.Build the Inner FrameYou'll want a large assembly table for this project.A full sheet of 3/4-in.
plywood scr*w*d to a pair of sturdy sawhorses does the trick.Otherwise, you'll need to work on the floor.Assemble the struts (GGG) from stock that's at least 1/4 in.too long and trim them to final length after assembly.
Then join them to the frame sides (HHH) with screws.Next, try building one of these amazing platform beds.Assemble the Side RailThe rest of the bed frame is made from oak plywood (G-J).The bed rails get 1-1/2-in.
edging (KK) on the end and 3/4-in.edging on the top (LL).The side rails are plywood strips edged with solid wood.Clamp the top edging in place, using cauls to distribute the pressure.You'll need a long clamp to attach the end block edging.
To extend the reach of a pipe clamp, just add another length of pipe using a coupler.Make a Template for the Side RailsTrace along the paper template and then cut a template from 1/4-in.plywood.The plywood template serves double duty as a drilling guide and a routing pattern.
Use the template to position hardware holes and to mark the curves.Rough-cut the curves with a jigsaw.Smooth the curves by sanding or by running a pattern router bit along the template.Drill the Hardware HolesThe template positions the holes perfectly.
A stop block ensures the correct depth.Rough-cut the curve, then finish it with a router and a pattern bit guided by the template.Assemble the Bed FrameAttach the head rail, foot rail and side rails to the inner bed frame.
Cut two pieces of plywood for the bed face panels (A).Trim one side and the top edge (where the foot of the bed will be) of each panel with 1/4-in.edging.Lay the two panels face down on your bench and b*tt the two pieces together so the hardwood edges are to the outside.
Lay the assembled bed frame on top of the panels and attach with screws.Flip the entire bed frame over so you can cover the face panels with false doors and drawers.Add False Doors and DrawersWith a helper, carefully turn over the bed frame assembly so it's face up on your bench.
Rip the stock for the faux panels and drawers (UU-BBB) to width.Use 1/8-in.spacers to create gaps between the faux doors and drawers and attach with glue and brads or pins.Be sparing with the glue to avoid squeeze-out, which is tough to clean up.
Go ahead and mount the pulls and knobs.Be careful to avoid the inner frame structure when placing your hardware.Remove all the hardware until after the cabinet is finished.Cut and fit the mattress supports (X).
Don't scr*w these into place until final assembly.If this project is a little too complicated for you, check out these six woodworking projects you can make with just a jigsaw.Build the Shelf UnitsCut the bed cabinet plywood parts (B, C, E).
Glue and clamp 3/4-in.hardwood edging (MM) on the bed cabinet verticals.Add 1/4-in.edging to the top and bottom edge of the headboard.Lay out and drill for the hardware.If you plan to add the light fixtures, now is the time to cut the 2-7/8-in.
- diameter holes in the bed header panel.Follow the instructions in the kit.Screw and glue the mounting cleats (JJJ) to the ends of the header board.Add the header front and back (BB) according to the instructions.
Wait to assemble the bed cabinet.The bookcases on either side of the bed cabinet are assembled with the same scr*w and cleat system used for the bed cabinet.Cut the plywood parts (F, N-R, U) and cleat stock (KKK-NNN).
Cut 1/4-in.-deep by 3/8-in.- wide rabbets along the back edge of the middle and bottom shelves and on the cabinet sides between the two shelves.Assemble the side cabinets with screws.Cut the face frame and pullout parts for the side cabinet (DD-HH).
Build the face frames with pocket screws or dowels.Clamp and glue the face frames to the cabinets.Cut and glue the hardwood edge on the middle shelf.Build and mount the pullout.Add the faux panel frames (CCC-EEE) to the doors.
Mount the doors.If you're using Euro-style cup hinges, be sure to order the ones made for thick doors.Cut and fit the backs (Y).Build the Fascia BoxesCut the parts for the three cabinet top and fascia assemblies (D, K-M, S, T, V, W, PP-TT).
Assemble the fascia boxes with screws and glue.Cut and fit the 1/4-in.oak fascia with mitered corners.Trim the 1/2-in.plywood in the same manner.Attach the fascia trim board to the bottom of the fascia boxes, then scr*w the box down onto the top of each cabinet.
If you're using lights, use a jigsaw to make a 4-in.-diameter hole in the bottom of each fascia trim board.Cut the top parts (D, M, CC).Cut a 15-degree bevel on the top trim on the table saw.Cut and miter the top trim to fit.
Wait to attach the tops until installation.Drill ventilation holes in the cabinet tops for the lights.Assemble the Bed CabinetYou'll need at least one helper for this phase of the project.The Murphy bed can be disassembled as far as you need to get the bed into the room.
The only thing remaining that's large and cumbersome is the bed frame.If the bed has to wind its way through a narrow staircase or other obstacle, consider leaving off the middle drawer and the two horizontal dividers on the faux front.
These are the elements that bridge the two face panels and once installed cannot be easily dismantled for moving.You can reassemble the bed frame in the room and add the drawer and horizontal dividers at that point.
Before installation, reattach all the bed hardware but leave the bed stops, pulls and handles off for now.Place a pad on the floor about 2 ft.in front of the wall where the bed will be mounted.Lay the bed frame face down on the pad with the head of the bed frame toward the wall.
Mount the bed cabinet sides to the bed frame on the metal pivots.At this point, the cabinet verticals should also be face down alongside the bed frame.Attach the headboard with screws.Screw the Cabinet to the WallWith a helper on the other side, lift the bed cabinet up to the vertical position.
Be sure the leg support is folded up before you lift the cabinet.Then attach the bed header assembly to the top.Next, lift the bed frame into the vertical position while your helper holds the cabinet.Be careful: Until the cabinet is attached to the wall, you need someone holding the bed in place and keeping the cabinet steady.
With the bed cabinet and frame vertical, it's time to attach the gas springs.Snap the ends of the springs onto the ball stud plates on the bed frame and the cabinet verticals.The springs are marked with a 'This End Up' sign; follow the directions carefully.
Attach the bed stops from inside the cabinet.With the bed held in place by the gas springs, go ahead and move the cabinet up against the wall.Mark the stud locations just above the bed header and attach with screws.
Add the Side CabinetsSlide the bookcases in position and attach to the bed cabinet.All that's left is to remount the crowns and add the tops.Go ahead and pull the bed frame down and swing the leg supports to the floor.
Without the mattress, the bed will want to close back up.Add a little weight to it to hold it down while you attach the two 1/4-in.plywood mattress supports to the inner frame.Add the elastic retaining straps and you're ready to set the mattress into place.
See 56 brilliant woodworking tips from our readers and editors...