How To Hang Shelves
How to hang shelves is bookmark about Building Shelves bookmarked by todd with ID 13109352157 was uploaded on 12-02-2019 and has been viewed 49,363 times.
Hanging shelvesFrom leveling to anchoring, here are 10 tips to make sure your next shelf-hanging project is quick, easy and strong.We'll show you tips for hanging and installing everything from store-bought display shelves to DIY closet shelves.
And even if you don't have any shelf projects in the near future, you'll find leveling and anchoring tips here that you can use on other building projects.Mark the tape, not the wallDon't make your marks directly on the paintLocate studs and mark their locations without making permanent marks on painted walls.
Make your marks on 'delicate duty' masking tape instead.The first step in any shelf-hanging project is to locate the studs so you can anchor the shelf to the studs if possible.Here's a tip that allows you to make marks that are clearly visible without the need to repaint the wall.
Use a level and draw a very light pencil line where you want the top of the shelf to be.The shelf will hide the line.Apply a str*p of masking tape above the line.Use 'delicate surface' masking tape to avoid any possibility of messing up the paint.
Locate the studs and mark the centers on the tape.Electronic stud finders are the go-to tool for this task.Now you can plan your shelf-mounting project to hit as many studs as possible and use the tape as a guide for leveling and attaching the shelf.
Figure-eights simplify the jobDrill a recess for the figure-eightUse a sp*d* bit or Forstner bit to drill a slight recess in the back of the shelf to accommodate the thickness of the figure-eight.Then chisel out the remaining wood until the figure-eight sits flush to the shelf.
Attach the figure-eight with a screw.Simply scr*w it onHang the shelf by driving screws through the figure-eights either into hollow-wall anchors or into studs.These nifty little fasteners are actually designed to attach table and desktops to aprons (the vertical skirt around the perimeter), but they're also a handy solution for hanging shelves.
You can buy a pack of eight at woodworking stores or online.The only caveat is that the top of the figure-eight shows above the surface of the shelf, so it may be visible if you hang the shelf low.Try to position the figure-eights where there are studs if possible.
You can use good-quality hollow-wall anchors if the studs don't line up with the figure-eights.Dead-on leveling with a laserGot a lot of shelves to level? A laser level is the perfect tool.We're using a self-leveling laser, but any laser that projects a horizontal level line will work.
The tip is that you don't have to mess with getting the laser line at the height of your shelf.Just project it anywhere on the wall, and use it as a reference by measuring up from the line.This is especially handy if you're hanging several shelves at different heights, since you never need to reposition the laser.
You can pick up a decent, inexpensive self-leveling laser online or in the tool section of your local home-improvement store.Then you'll have it for any other interior leveling tasks.Super-sturdy closet shelvesSimple, sturdy support for shelves and closet rods.
Depending on your shelf, a #3 pine 1x4 and some paint might be all you need.Here's a fast, strong and easy way to hang closet shelves.Paint a 1x4 to match your shelf.Then draw a level line and locate the studs—use the masking tape trick we showed you earlier.
Nail the 1x4 to the studs with 8d finish nails.Run the str*p across the back and ends of the closet.Then put blocks in the locations where you want brackets.Now you have solid wood to attach the brackets and the closet pole sockets to.
And the back of the shelf is fully supported to prevent sagging.The key to keyholesMark; don't measurePlace a str*p of masking tape on one edge of your level and mark the center of each keyhole on the tape.
Transfer to the wallHold the level against the wall at the height you want the shelf.Remember that the top of the shelf will be above your marks.Adjust the level until the bubble is centered, and mark the keyhole locations on the wall.
Then install anchors or drive the screws into the studs and hang the shelf.Keyhole slots on the back of shelves are a common way to hang shelves or brackets on hidden screws, but you have to get the screws perfectly aligned or you'll have all kinds of trouble.
Here's one foolproof method for transferring a pair of keyhole locations to the wall for perfect scr*w placement.If you're lucky, you may be able to line up the scr*w locations with studs.Otherwise, use this method to mark the center of the hollow-wall anchors you'll need.
Ditch those old-school toggle boltsOf course it's always best to fasten heavy shelves to studs, but if you can't, there's an anchor that's almost as good.If you've used standard toggle bolts, you know they hold well.
But they're a hassle to work with, and they leave an oversize hole that may show.And if you ever need to take the shelf down to paint, the toggle falls into the wall and you have to repeat the whole tedious process when you reinstall the shelf.
Snaptoggle anchors by Toggler solve these problems.After installing the toggle according to the instructions, you'll have a threaded opening in the wall ready to receive the included bolt.You can simply scr*w the shelf to the captured toggle.
And you can remove the bolt and the toggle will stay put, ready for you to reinstall the shelf.You'll find Snaptoggle anchors in hardware stores and home centers alongside the other wall anchors.Go to toggler.
com to see a video showing how to install them.Build in a hanging railAdd versatilityFirmly attach the rail to the hanging shelf, then scr*w it to the studs.Whether you're building a shelf or modifying a store-bought unit, including a hanging rail is a great way to add strength and allow for more flexible positioning while anchoring to studs.
The rail strengthens the hanging shelf and lets you anchor the shelf by driving screws anywhere along the length of the rail.If the hanging shelf isn't too heavy, you can hang it with finish-head screws that are easy to hide with wood putty.
For heavier shelves, drill recesses for wood plugs to hide the screws.Self-plumbing standardsThe next time you install metal shelf standards, remember this tip.Rather than use a level to plumb the standards before you attach them, simply hang them loosely from the top with one of the screws and let gravity do the work.
The standard will hang plumb, and all you have to do is press it to the wall and drive in the remaining screws.If you're using hollow-wall anchors, hang the standard from the top scr*w and use an awl to mark the scr*w locations.
Then take the standard down and install the anchors.Throw away the free anchorsBetter hollow-wall anchorsWe prefer this kind of hollow-wall anchor.They're easy to use and they stay put.Hollow-wall anchor boltThe hollow-wall anchor bolts that came with your shelving aren't worth the material they're made of.
Most of the hollow-wall anchors included with shelves or shelf brackets aren't worth using.If you can't attach your shelf to studs and must use hollow-wall anchors, make sure to choose one that will support your shelf in the long run.
For light-duty shelves, we like the type of anchor shown here.You'll find them at any hardware store or home center.Make sure you know how thick your drywall or plaster is before you head to the store, though.
Then match the anchor to the wall thickness.To install the anchors, check the instructions and drill the right size hole.Then fold the wings so the anchor will fit and press it into the hole.You may have to tap it with a hammer until it's fully seated.
Finish by pressing the included red tool through the hole to expand the wings behind the drywall or plaster.And make sure to use the screws included with the anchors, or ones that are the same diameter.
French cleats for fast, solid hangingPairs of beveled strips that interlock to support shelves, cabinets or pictures are called French cleats.They're great for hanging any shelf or cabinet and have a few advantages in certain situations.
First, the cleats work well for heavy cabinets because you can easily mount the wall cleat and then simply lift the cabinet and 'hook' it on.There's no need to support a heavy cabinet temporarily while you drive screws to anchor it.
Another common use for French cleats is to create a flexible system of shelves or cabinets.You can scr*w one or more lengths of wall cleats across the entire wall, and then easily relocate shelves, or add more shelves at a later date.
Make cleats by ripping strips of 3/4-in.plywood with a 45-degree bevel on one edge.Screw one str*p to the wall and the other to the back of the shelf or cabinet.Required Tools for this ProjectHave the necessary tools for this DIY project lined up before you start—you'll save time and frustration.
PencilRequired Materials for this ProjectAvoid last-minute shopping trips by having all your materials ready ahead of time.Here's a list...