Routing Tongues

Routing Tongues Joinery

Routing tongues is article about Joinery bookmarked by leo with ID 12370155794 was uploaded on 08-03-2019 and has been viewed 48,110 times.

I cut the tongues for tongue-and-groove joints with a router.There are faster methods, but the router's precision depth adjustment produces a fit that's unbeatable.First set the router depth by trimming the edge of a scrap board.

Flip the board over, trim the other side and test the resulting tongue in the groove (which has been previously cut).Make fine depth adjustments and continue to rout test tongues until the fit is perfect.

To cut the tongue, first measure the distance from the router base to the bit.Then clamp a fence to the work this distance from the tongue.Gently tap the fence into perfect position with a mallet, checking the measurement with a steel ruler...

Read More →

Disclaimer: images, articles or videos on this website sometimes come from various other media sources. Copyright is fully held by the source. If there are problems related to this, you can contact us on this page.
Bookmark ID: 12370155794

Routing tongues is just one of the many collections of bookmark on this website. There are approximately 75 posts that exist in our database associated with this article. Here are the details of "routing tongues" article:

Category:
Title:
Image URL:
Post URL:

This is a bookmark related to routing tongues, there are approximately 75 post related to this joinery category. Please see the details below and click on the title for more information..

Routing Tongues Joinery 150 x 100

Routing Tongues

I cut the tongues for tongue-and-groove joints with a router.There are faster methods, but the router's precision depth adjustment produces a fit that's unbeatable.First set the router depth by trimming the edge of a scrap board.Flip the board over, trim the other side and test the resulting tongue in the ... Routing tongues is bookmark about Joinery bookmarked by sergio with ID 12370155794 was uploaded on 08-03-2019 and has been viewed 48,110 times.

Jig For Routing Sliding Dovetails In Drawer Fronts Construction 150 x 100

Jig For Routing Sliding Dovetails In Drawer Fronts

I recently received an order for drawers joined at the front with sliding dovetails.Because the drawers were of many different sizes, I needed to make a router jig that would accommodate drawer fronts of different lengths and widths.The jig I came up with consists of a base with a fixed ... Jig for routing sliding dovetails in drawer fronts is bookmark about Construction bookmarked by ken with ID 1160607193 was uploaded on 27-03-2019 and has been viewed 46,445 times.

Routing The Edges Of Odd Shaped Pieces Construction 150 x 100

Routing The Edges Of Odd Shaped Pieces

Shaping edges on small pieces with a router is always ticklish.I was recently faced with this problem when I needed to round over edges on some one-half scale tapered walnut rocking-chair arms.My magic mat wasn't stable enough.And because I wanted to round over the perimeter in one pass to keep ... Routing the edges of odd shaped pieces is post about Construction bookmarked by steve with ID 11810576932 was uploaded on 09-03-2019 and has been viewed 2,715 times.

Routing A Raised Rim Tabletop Construction 150 x 100
Routing A Raised Rim Tabletop

In reproducing an 18th-century pedestal table, I was faced with the problem of forming a raised-rim top.The traditional method was to use a lathe for this process.But even my small 25-in.top was far beyond the capacity of my lathe.So I devised this router jig to shape the table's top Routing a raised rim tabletop is article about Construction bookmarked by hugh with ID 1405652803 was uploaded on 12-03-2019 and has been viewed 418,291 times.

Routing Fingernail Edges Construction 150 x 100
Routing Fingernail Edges

Your roundover router bits can do double duty cutting fingernail-shaped edges if you simply change the angle at which the work moves into the bit.I use the bits in a router table with an auxiliary fence that presents the stock to the bit at a 45¡ angle as illustrated.A 1/2-in.bit ... Routing fingernail edges is bookmark about Construction bookmarked by leonard with ID 12512191292 was uploaded on 08-02-2019 and has been viewed 374,337 times.

Routing Tambour Grooves Construction 150 x 100

Routing Tambour Grooves

I recently built a set of display cases that had tamboured doors with 1/4-in.thick edges.I wanted the grooves in which they ran to be 1/32-in.wider so the tambour wouldn't bind.To accomplish this I applied iron-on veneer edging tape around half the radius of my router base.To cut the groove I ... Routing tambour grooves is post about Construction bookmarked by clifford with ID 11643112746 was uploaded on 25-01-2019 and has been viewed 113,258 times.

Routing V Grooves In Tongue And Groove Construction 150 x 100

Routing V Grooves In Tongue And Groove

To produce identical chamfers on matching edges of tongue-and-groove stock, I use an extra piece of stock with a nailed-on router fence, as shown in the sketch.Both the tongued and the grooved edges can be pushed flush to the jig, ensuring a balanced V-groove in the finished work and eliminating ... Routing v grooves in tongue and groove is bookmark about Construction bookmarked by andy with ID 11542898666 was uploaded on 27-03-2019 and has been viewed 270,075 times.

Routing European Hinge Mortises Construction 150 x 100

Routing European Hinge Mortises

Several years ago, I remodeled my kitchen and painstakingly arrived at many of the details presented in Bill Pfeiffer's European-style cabinets article (Fine Woodworking #43).I have neither a drill press nor the 1-3/8-in.Forstner bit with which he bores the large mortises for the door hinges.Instead, I made a router jig ... Routing european hinge mortises is bookmark about Construction bookmarked by earl with ID 12095791269 was uploaded on 05-04-2019 and has been viewed 150,873 times.

Routing Hardware Mortises Construction 150 x 100

Routing Hardware Mortises

Synopsis: Jeff Greef describes a way to mortise just about any kind of door or cabinet hardware using a few template fixtures and router.He does chisel the corners square, but this method saves him time and money.Each fixture has only two parts, simplifying setup.He explains how he routes hinge, lock, ... Routing hardware mortises is bookmark about Construction bookmarked by oscar with ID 14010559143 was uploaded on 05-01-2019 and has been viewed 243,617 times.

Routing Dadoes With A Template Joinery 150 x 100
Routing Dadoes With A Template

Routing dadoes with a template is post about Joinery bookmarked by raul with ID 1766499491 was uploaded on 23-03-2019 and has been viewed 392,718 times.

Jig For Routing Lock Miter Joints Joinery 150 x 100
Jig For Routing Lock Miter Joints

Here is a simple jig that enables the safe and accurate cutting of lock-miter corner joints that require both a horizontal and a vertical pass over the router bit.Cutting these joints by holding boards in a vertical position with just your hands is a daunting task.The operation can be dangerous, ... Jig for routing lock miter joints is bookmark about Joinery bookmarked by juan with ID 12490444321 was uploaded on 16-01-2019 and has been viewed 7,715 times.