Router Bit Reviews Eagle America Edge Banding Router Bits
Router bit reviews eagle america edge banding router bits is post about Buying Advice bookmarked by gilbert with ID 162061721 was uploaded on 19-04-2019 and has been viewed 282,756 times.
Eagle America's 2-Piece Edge Banding Bit Set, $39.95, promises a simpler way to edge band man-made materials like plywood.Does it keep that promise? The set consists of two cutters, match ground.The bits have 1/2' shanks, and are not available with 1/4' shanks.
The premise is that you'll cut a negative profile V into the edge of the sheet stock with the bit on the right, then a positive profile V into the wood banding with the bit on the left.The work must be done on a router table.
Set up consists of two things: first, setting the height of the bit so it's centered on the sheet stock.Second, locate the fence so that the V cut leaves two knife-edges on the sheet stock.Swap cutters and machine the solid wood using similar set up parameters.
Center the bit on the thickness of the material and locate the fence so the V cut comes to a perfect point.Note that it's easiest and safest to machine a wide piece, then rip the narrow piece of edge banding from it later.
After ripping the narrow banding from the wide board machined in the previous step, glue it into the V.Flush trim...