Ask Wwgoa Cure Bandsaw Blade Movement
Ask wwgoa cure bandsaw blade movement is post about Blog bookmarked by gene with ID 12366366364 was uploaded on 14-04-2019 and has been viewed 242,045 times.
Question: I just put a new band saw blade (3/8″) on my saw.As I was trying to adjust the side bearings, I noticed that the blade moved in and out [in the direction of the cut] by about 1/4″.By the time I finished adjusting the bearings, the deviation was still about 1/4″.
Is this a bad blade? I've decided to leave it on the saw, under tension, for a few days and see if it straightens out.I've never seen anything like this.What's happening (it is a name brand blade - Olson, All Pro)? Has it been in the box, with 4 or 5 loops, too long? Submitted by Dondz Answer: Make sure the blade is resting on your band saw wheels in the right spot.
A 3/8″ blade should be bridging the crown of the band saw tires, which means centering blade on the upper wheel.Do this using the tracking adjustment on the back of the saw.With the saw unplugged, spin the upper wheel by hand and watch what the band saw blade is doing.
Make certain it's remaining where it should be on the wheel.Once the tracking is correctly set the front of the blade should remain in a...