Osborne Eb 3 Miter Gauge Review
Osborne eb 3 miter gauge review is post about Buying Advice bookmarked by nathaniel with ID 1526161286 was uploaded on 02-03-2019 and has been viewed 305,876 times.
It's not news that standard-issue table saw miter gauges are often sub-standard.The bar wiggles in the slot and it can be nearly impossible to accurately set the head.That's why woodworkers upgrade their miter gauges.
I recently tested the Osborne EB-3 miter gauge, $120.Here's what I learned.PRODUCT OVERVIEW The EB-3 uses a unique triangle system.It looks like a shelf bracket.The concept makes sense, since we all know how strong shelf brackets are.
Osborne strives to have every EB-3 dead on right out of the box.If a tweak does need to be made to zero the miter gauge, it's easy to do.The Osborne miter gauge can be used on either side of the blade, left or right tilt saw.
It takes a minute or two of disassembly and reassembly to make the change.Angles are set by loosening the thumbscrew and sliding the inner brace in or out of the outer brace.Preset angles (0-45 in 5-degree increments left and right, plus 22.
5 left and right) are hit by loosening the thumbscrew and depressing a plunger on the bottom of the outer brace while you move the inner brace.The plunger will hit detents at the presets.The miter gauge bar...