Nexabond Glue Product Review
Nexabond glue product review is post about Buying Advice bookmarked by barry with ID 11083524088 was uploaded on 31-03-2019 and has been viewed 291,603 times.
Have you ever found yourself in a situation where you had to add a small part to a project, such a piece of trim, and you didn't want to drive a brad through it, but you couldn't hold it for 10 minutes until the glue set up? The Nexabond glue product, Nexabond 2500S, provides a great solution to this common situation.
Nexabond 2500S is a cyanoacrylate based adhesive that is optimized for bonding wood (even oily species).When using it, I have found that I only need to hold an item in place for about 10-15 seconds before I can reliably let go and allow the glue to hold the piece in place.
After about two minutes, the bond has achieved enough strength to allow moderate machining to take place.This chart from the manufacturer's web site shows the bond strength compared to typical water based wood glue at various time intervals.
As you can see, the initial set time with Nexabond 2500S is dramatically faster, and at full cure, it delivers equivalent bond strength.I put the product through a couple simple tests in my shop.First, I glued a small piece of walnut onto a cherry board.
After holding the piece...