Modern Media Cabinet Part 4 Drawer Bank Construction And Assembly
Modern media cabinet part 4 drawer bank construction and assembly is bookmark about Cabinetry bookmarked by ernest with ID 1805221941 was uploaded on 13-03-2019 and has been viewed 210,645 times.
In the previous installment of this project, we constructed the horizontal stretchers complete with tenons.Now we will focus on building the drawer bank using plywood joined with biscuits.We will also assemble the cabinet in two stages to simplify this otherwise complex glue-up.
See Diagram C for details on construction of the drawer bank.DRAWER BANK The bottom portion of the unit will house the drawers and serve as the bottom shelf for electronics gear.The perimeter of the box will be formed by pieces that were milled in previous steps (plywood rails on sides and rear, and hardwood face frame rails on the front).
Now mill the top and bottom plywood panels which will be attached to the rails around the perimeter using biscuit joinery.(If you don't have a biscuit joiner you can use a router for this as described in this article.
) CUT TOP, BOTTOM AND DRAWER DIVIDER COMPONENTS Use good veneer plywood for the top, but you can get away with lower quality material for the bottom if you would prefer since it won't be visible.The drawer dividers are made by sandwiching two pieces of 1/2″ Baltic birch plywood together to make a single 1″ thick panel.