How To Build A Bar Out Of Pallets Simple Diy Project Tutorial
How to build a bar out of pallets simple diy project tutorial is post about How To bookmarked by ronnie with ID 13037200651 was uploaded on 16-02-2019 and has been viewed 46,198 times.
Talk about a cool conversation piece! The Recycler YouTube channel has an amazing tutorial that teaches how to build a bar out of pallets, which you can watch below and then check out the step by step and tips we've compiled below to complete the project: Build the FrameCut four pieces of pallet timber and make them 64" tall.
Use a chop saw to do this.Cut four pieces of timber into 39" pieces using a chop saw.Build the front part of the frame first- drill a small hole into the ends and hammer in a 6-inch nail.Do this on all four corners.
Put in a center piece to add stability to the frame.You're going to build the back part of the frame the exact same way, but do not put in the center piece of wood.Cut four sections into 18-inch pieces and nail them to the front frame corners.
Flip it over and nail the back onto the frame.Place the lats Measure from the front to the back of the bar and cut the lats.Screw these into place.Cover the Frame with MDF Board Use thin MDF board, cut it to size, and nail it to the front and the sides of the bar frame...