The 5 Shelf
The 5 shelf is post about Plans bookmarked by frederick with ID 11203586088 was uploaded on 27-04-2019 and has been viewed 143,983 times.
The 5 Shelf One simple shelf, five dollars, five ways .or more.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: WendySpinelli Handmade by: sophie Handmade by: MykelleeShopping List: 1 - 1×6 board, 5 feet long2 metal angles like these - they are just used to hang the shelves on the wall - don't need anything fancy here.
Check the hardware aisle.3/4″ screws (you will only need 4 - two for each metal brace)2″ screws (for attaching to the wall, use a dry wall anchoring system if you can't locate a stud or wish to place the shelf not on a stud) Tools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesHearing ProtectionDrillCircular SawJigsawPower SanderDrill Bit SetCut List: 1 - 1×6 @ 36″1 - 1×6 @ 15″1 - 1×6 @ 9″ Step 1: Notch Boards Measure and mark the boards as shown above.
Carefully cut the notches out with the jigsaw.I make the side cuts first, then go back and make a curved cut from the side to the opposite corner, and then go back and cut to the remaining corner.Step 2 Instructions: Assemble Now at this stage, you really want to test the fit.
Make sure the boards fit...