Daybed is article about Plans bookmarked by ron with ID 13229025296 was uploaded on 22-03-2019 and has been viewed 198,761 times.
Daybed Full size day-bed.After making all the cuts, I started on the sides by gluing and nailing the 1/2 X 3/4 wood into the side design.That was the most difficult part of the build.The rest of the bed went fairly smooth but it did take me well into the night to get it sanded and painted.
I got the plans from this site after we had seen this same bed at a furniture store for about ten times the cost of what it took me.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Add your project.
2 inch screws3/4 inch finish nailsElmer's Wood GlueElmer's Wood Filler120 grit sandpaperpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilHammerSafety GlassesDrillCompound Miter SawPower SanderLevelDrill Bit SetGeneral Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section.Take all necessary precautions to build safely and smartly.Work on a clean level surface, free of imperfections or debris.Always use straight boards.
Check for square after each step.Always predrill holes before attaching with screws.Use glue with finish nails for a stronger hold.Wipe excess glue...