Mod Bar Stemware Hutch
Mod bar stemware hutch is bookmark about Plans bookmarked by dwight with ID 12035538460 was uploaded on 21-02-2019 and has been viewed 272,093 times.
Mod Bar - Stemware Hutch Plans to build a stemware hutch inspired by Pottery Barn's modular bar collection.Build your own with free, step-by-step plans.HANDMADE FROM THIS PLAN >> Projects built from this plan.
Thank you for submitting brag posts, it's appreciated by all! Handmade by: SaraLodise Handmade by: thurm12 Handmade by: Amanda RShopping List: 10 feet of 1x12 boards - for three hutches, use a single sheet of plywood cut into 11 ¾' wide strips 8 feet long.
Make longest cuts first.2 - 1x2 @ 8 feet long1 - 1x3 @ 8 feet long2 - 2x2 @ 8 feet longUse ¼' plywood from base to cover back.1 1/4 inch screws2 inch screws1 1/4 inch finish nails1-1/4" Pocket Hole Screws2-1/2" Pocket Hole ScrewsElmer's Wood GlueElmer's Wood Filler120 grit sandpaperprimerwood conditionerpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilHammerSafety GlassesHearing ProtectionKreg JigDrillCircular SawJigsawCompound Miter SawTable SawBrad NailerPower SanderDrill Bit SetGeneral Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section.Take all necessary precautions to build safely and smartly.Work on a clean level surface, free of imperfections or debris.Always use straight boards.
Check for square after each step.Always predrill holes before attaching with...