Entry storage is article about Plans bookmarked by james with ID 13428642098 was uploaded on 31-01-2019 and has been viewed 311,850 times.
Entry Storage This project requires only 2 sheets of pine 3/4" plywood.I purchased all the materials at Home Depot for $42.00 and had them cut all the materials to size right at the store for me.It took them about 15 minutes to cut everything and it took me about 2 hours to assemble and jig saw out the curves when I got home.
Using my Kreg Jig really saved a ton of time.My wife put more before and after pictures on her blog kelley.mortier.org HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Add your project.
Shopping List: 2 sheets of 3/4" plywood 1 1/4 inch screws1-1/4" Pocket Hole ScrewsElmer's Wood Glue120 grit sandpaperpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesKreg JigDrillJigsawPower SanderGeneral Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section.Take all necessary precautions to build safely and smartly.Work on a clean level surface, free of imperfections or debris.Always use straight boards.
Check for square after each step.Always predrill holes before attaching with screws.Use glue with finish nails for a stronger hold.Wipe excess glue...