Hutch For The Cube Drawer Bench
Hutch for the cube drawer bench is bookmark about Plans bookmarked by ross with ID 11361780711 was uploaded on 18-03-2019 and has been viewed 350,440 times.
Hutch for the Cube Drawer Bench Hutch to match the cube collection drawer bench.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: misterwilbur Yesterday, it was the drawer bench plans.
Today? The matching hutch.Shopping List: 2 - 8′ 1x12s or 1 - 14′ 1×123 - 8′ 1×2 Boards1/4″ Plywood2″ Screws or 1 1/4″ pocket hole screws2″ finish nails Elmer's Wood GlueElmer's Wood Filler120 grit sandpaperprimerwood conditionerpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesHearing ProtectionKreg JigDrillCircular SawPower SanderLevelDrill Bit SetDimensions: Dimensions shown above.
It is sized to fit the bench perfectly.And books.And storage cubes.Cut List: 2 - 1×12 @ 38″ (Sides)3 - 1×12 @ 27″ (Shelves)4 - 1×2 @ 38″ (Side Trim)2 - 1×2 @ 25 1/2″ (Top Trim)1 - 1/4″ Plywood @ 38″ x 28 1/2″ (Back) Step 1: This is how easy it is to build.
Build the box with 2″ screws and glue or use 1 1/4″ pocket hole screws.Step 2 Instructions: Trim out the sides.Keep outside edges flush.Nail into shelves too.Use 2″ finish nails and glue.Step 3 Instructions: Now the top trim.
Same thing, 2″ nails and glue.If you are using a Kreg Jig™, build the face frame first, then nail on.Step...