Stools For The Bar Table For The Simple Outdoor Collection
Stools for the bar table for the simple outdoor collection is post about Plans bookmarked by steven with ID 13095474638 was uploaded on 10-03-2019 and has been viewed 220,845 times.
Stools for the Bar Table for the Simple Outdoor Collection These simple modern outdoor bar stools look great on your patio or even indoors.Simple and inexpensive to build, flat legs add updated style.HANDMADE FROM THIS PLAN >> Projects built from this plan.
Thank you for submitting brag posts, it's appreciated by all! Handmade by: MarisolShopping List: 12′ of 1x2s18′ of 1x3s2″ Screws1 1/4″ Screws 1-1/4" Pocket Hole ScrewsElmer's Wood GlueElmer's Wood Filler120 grit sandpaperprimerwood conditionerpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilHammerSafety GlassesHearing ProtectionKreg JigDrillPower SanderGeneral Instructions: Sand and finish your board before assembling (unless you can use a spray finish).
Work on a clean level surface and predrill and countersink your scr*w holes.Keep outside edges flush and use glue.Check for square after each step.Be safe, have fun.Dimensions: Overall dimensions are shown above.
Cut List: CUT LIST2 - 1×2 @ 13″ (Seat side aprons)2 - 1×2 @ 12 3/4' (Seat end aprons)2 - 1×2 @ 11 1/2″ (Seat supports)2 - 1×3 @ 14 1/2″ (Breadboard Ends)5 - 1×3 @ 10 3/4″ (Seat Slats)4 - 1×3 @ 29 1/4″ (Legs)2 - 1×2 @ 13″ (Bottom Supports)2 - 1×2 @ 12 3/4″ (Bottom Supports) Step 1: SEAT FRAMEBuild your seat frame with glue and 2″ screws as shown above.
Make sure the...