Doors For The Apothecary Media Console
Doors for the apothecary media console is article about Plans bookmarked by gabriel with ID 13812703103 was uploaded on 17-02-2019 and has been viewed 127,478 times.
Doors for the Apothecary Media Console Doors and drawers for the Apothecary Console.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: Cassie1686 Handmade by: Marisol Handmade by: CreativePineapple Handmade by: Kimiemich Handmade by: bhammond Handmade by: JessicaElizabeth Handmade by: griffsci Handmade by: balinsteadt I did promise you drawersand doors.
Today.For yesterdays apothecary media cabinet.Shopping List: 2 - 1×8 Boards, 10′ Long2″ ScrewsScrap 1×16 and 1/4″ plywood from the base cabinet16 Knobs4 Total Euro Style Hinges, Full Overlay or Inset (see below) Tools: Tape MeasureSpeed SquareCarpenter's PencilHammerSafety GlassesHearing ProtectionCircular SawBrad NailerPower SanderDimensions: Dimensions are shown aboveCut List: Cut List: For 4 Drawers4 - 3/4″ Plywood or MDF @ 13″ x14″ (Drawer bottoms, use scrap 1×16 pieces)4 - 1×8 @ 13″ (Drawer Backs)8 - 1×8 @ 14 3/4″ (Drawer Sides)4 - 1×8 @ 14 1/2″ (Drawer Fronts16 - 1/4″ plywood @ 7″ x 7 3/4″ (False Faces) Cut List: For Both Drawers (Drawers are not the same!)1 - 3/4″ Plywood or MDF @ 16″ x15 1/2″ (Larger Door, use scrap 1×16 pieces)1 - 3/4″ Plywood or MDF @ 16″ x14 5/8″ (Smaller Door, use scrap 1×16 pieces) 8 - 1/4″ plywood @ 7″ x 7 3/4″ (False Faces, use...