Madeline Bridge For The Nursery Storage Wall
Madeline bridge for the nursery storage wall is bookmark about Plans bookmarked by marvin with ID 13698649621 was uploaded on 12-03-2019 and has been viewed 161,554 times.
Madeline Bridge for the Nursery Storage Wall A bridge over the Madeline Changing Table adds both beauty and additional storage to the Madeline Changing System.Features scalloped trim and a full bottom support.
Attaches to the side hutches.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: HuthbertShopping List: Shopping List 1 - 1×6 Board, at least 6′ length (about $5.
00 Each)1 - 1×3 (about $1.50 Each)1 - 1×12, 4′ Length (About $6.00 Each)2″ Nails or 2″ Screws1 1/4″ Nails or 1 1/4″ ScrewsWood GlueWood FillerPaint and Finishing Supplies Tools SawJigsawPnematic Nailer or Drill with Countersink and drill bitsMeasuring TapeSquare Tools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesDimensions: Overall Dimensions are shown above.
The dimensions of the bridge will fit the width of the lower changing table dimensions and also match the sides of the Scalloped Hutches.Cut List: 2 - 1×6 @ 12 1/4″ (Sides)1 - 1×6 @ 38 1/2″ (Back)1 - 1×3 @ 38 1/2″ (Front Trim)1 - 1×12 @ 38 1/2″ (Shelf) Step 1: Compositions is shown above.
The most inexpensive method is to use painted pine boards.A Pine shelf top in a 1×12 width will be stronger, but a MDF top should be fine.To use MDF, cut your...