Madeline Side Hutches For The Nursery Changing Wall
Madeline side hutches for the nursery changing wall is post about Plans bookmarked by casey with ID 12080386519 was uploaded on 06-03-2019 and has been viewed 117,571 times.
Madeline Side Hutches for the Nursery Changing Wall Beautiful scalloped sides on these hutches create charm on the Madeline Nursery Changing Wall.Featuring a large tabletop surface and two shelves, this hutch is perfect for all of baby's things.
Shown with the rest of the Madeline Collection.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: jah_alh Handmade by: HuthbertShopping List: Shopping List for 1 Hutch 1 - 1×12 (you will only need about 4 feet per hutch)8′ of 1×16 (you should have leftovers from the base unit)1 -1×4 (you only need about 3′)1/4″ plywood, MDF, or luaun2″ nails1 1/4″ nailswood gluewood filler 1-1/4" Pocket Hole Screws120 grit sandpaperprimerwood conditionerpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilHammerSafety GlassesHearing ProtectionKreg JigDrillCircular SawJigsawPower SanderGeneral Instructions: Composition is shown above.
I am not going to recommend using A1 plywood to get a hardwood stain just because I don't know how difficult or easy it would be to iron on venner edge banding to the scalloped edges.I will have to go try this out in the garage and get back to you.
You can use pine boards for the 1x4s and 1x12s for painting.Also, you can use MDF cut into...