Cupcake stand is bookmark about Plans bookmarked by manuel with ID 11819477175 was uploaded on 17-02-2019 and has been viewed 7,328 times.
Cupcake Stand These things have become super popular lately, and I wanted to figure one out for later this summer but had the chance to use one for graduation so a few scraps and $5 in supplies later here it is.
Super sturdy, holds close to 100 cupcakes and can be dressed up in any way you see fit.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: reblumenthal If you have any questions I'll try and answer to the best of my ability.
It really sounds more complicated than it is.It just takes a second to work through the logistics when assembling it.Don't rush and think through every step and questions should answer themselves.Shopping List: Scrap 1/2" plywood.
I used a piece that was about 4ft by 18" and another small piece because one of my cirlcles overlapped.If you need new a 2 x 4 ft piece should be more than enough.You'll also need 1" PVC pipe, about 2 feet.
For 5 tiers I used 6 1" couplers and 2 1" caps from the plumbing section also.You'll add 2 couplers for each additional tier.1 inch screwsElmer's Wood Filler120...