Desktop Bridge For The Classic Storage System
Desktop bridge for the classic storage system is bookmark about Plans bookmarked by alex with ID 13163608846 was uploaded on 05-01-2019 and has been viewed 320,241 times.
Desktop Bridge for the Classic Storage System This simple to build desktop ties in bases from the Classic Collection to turn two bookshelves into a useable desk.Special thanks to Amy for sharing her desk that she built with a hammer and nails! HANDMADE FROM THIS PLAN >> Projects built from this plan.
Thank you for submitting brag posts, it's appreciated by all! Handmade by: melissa2Shopping List: Since this desktop requires additional plans, please check the cut list for materials you need.You most likely have the scraps already! 1 1/4 inch screws2 inch screws1 1/4 inch finish nailsElmer's Wood GlueElmer's Wood Filler120 grit sandpaperprimerwood conditionerpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesHearing ProtectionDrillCircular SawTable SawBrad NailerPower SanderGeneral Instructions: You know the drill, be safe, work on a clean level surface, use glue, check for square, predrill and countersink your screws, be careful about fastening to close to edges when working with MDF.
If you are building this, you have built the file cabinets, so no need to re-educate you here.Dimensions: 28" wide x 24" deep x 2 1/4" tallCut List: A) 1 - 1×24 @ 28″ (Desktop)B) 2 - 1×2 @ 23 1/2″ (Sides)C) 2 - 1×2 @ 26 1/2″ (Front and Back Supports)D) 2 - 1×2 @ 28″ (Front...