Classic Storage Wall System Bridge
Classic storage wall system bridge is bookmark about Plans bookmarked by felix with ID 12339469909 was uploaded on 17-03-2019 and has been viewed 134,490 times.
Classic Storage Wall System Bridge A bridge over your media station can give your storage a built in look and quality.But bridges can often be very expensive and not fit just right.With this simple plan that works with the rest of the Classic Media Storage Collection, you can build your own bridge, fit just perfect for your own tv, without spending a bundle.
HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: Jen Marzen Handmade by: Guest Handmade by: GuestShopping List: 1/2 Sheet of 3/4″ MDF or Plywood, cut into 16 1/2″ Strips, 8′ long3 - 1×21- 1×3 (you will only need 60″)at least 62″ of 2 1/2″ high moulding 1 1/4 inch screws2 inch screwsElmer's Wood GlueElmer's Wood Filler120 grit sandpaperprimerwood conditionerpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesHearing ProtectionKreg JigDrillCircular SawBrad NailerPower SanderGeneral Instructions: Cut your 3/4″ Plywood or MDF into strips 15 1/2″ wide by 8′ long.
These strips become 1×16 boards.Make your longer cuts first, and then your shorter cuts from the scraps.Work on a clean level surface.You can fasten with nails or screws, depending on your tools and the use of this piece.
Screws will hold better,...