Travertine Paver Side Table
Travertine paver side table is post about Plans bookmarked by carlos with ID 11963513644 was uploaded on 29-01-2019 and has been viewed 354,462 times.
Travertine Paver Side Table I wanted to make a table with a stone top.I went to a local tile and flooring store and found a 16" by 24" "Antique Parma Travertine Paver." It cost less than $6.I also had some scrap wood from repairing our fence - the wood had a lot of character and I was happy to use it.
This can be made with three 8' 2x2 boards - which will also be pretty cheap.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Add your project.
Author Notes: The base of this project is made form 2x2 boards, connected by 2 1/2" Kreg Jig pocket hole screws.I put the pocket holes on the underside of the boards on the bottom part of this project, so that they are not visible.
The cut list is very easy.The legs are 22" long.There two dimensions for the side pieces - 20" and 12" There are four 20" boards and eight 12" boards - very easy.See the attached PDF file for more details on dimensions.
2 1/2 inch screws120 grit sandpaperTools: Tape MeasureSpeed SquareSafety GlassesHearing ProtectionKreg JigDrillCompound Miter SawGeneral Instructions: Please read through the entire plan...