3 Think End Table
3 think end table is post about Plans bookmarked by philip with ID 1795850003 was uploaded on 24-01-2019 and has been viewed 395,056 times.
3" Think End Table Saw the Griffen Line of furniture at pottery barn and liked it not the price, so here is piece 1 the end table, planning on making the coffee table, and dining table next.:0) HANDMADE FROM THIS PLAN >> Projects built from this plan.
Thank you for submitting brag posts, it's appreciated by all! Handmade by: Our HomeMade Family Handmade by: thewoodbuilderShopping List: 2 - 2x6x82 - 2x4x8 2-1/2" Pocket Hole ScrewsElmer's Wood GlueElmer's Wood Fillerwood conditionerpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilHammerSafety GlassesHearing ProtectionKreg JigDrillCircular SawTable SawPower SanderDrill Bit SetGeneral Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section.Take all necessary precautions to build safely and smartly.Work on a clean level surface, free of imperfections or debris.Always use straight boards.
Check for square after each step.Always predrill holes before attaching with screws.Use glue with finish nails for a stronger hold.Wipe excess glue off bare wood for stained projects, as dried glue will not take stain.
Be safe, have fun, and ask for help if you need it.Good luck! 24H x 27L x 22WCut List: 8 - 2 x 6 @ 27" (Table Top)4 -...