Corner shelf is post about Plans bookmarked by stanley with ID 12197895917 was uploaded on 09-01-2019 and has been viewed 210,320 times.
Corner Shelf My wife requested a corner shelving unit to be able to display her Willow Tree collection, after looking through your website I noticed you didn't have one.So after designing and building this one I wanted to give back and donate my plans to your site.
I am not fluent in Sketchup so I attached my plans if you wanted to recreate them.The entire unit is made from common boards 1x4 from Home Depot.For the shelves I glue laminated them together and then used a router with a circle jig I made to cut the from radius.
The shelves are held in place with #8 x2" wood screws predrilled from the back.The horizontal supports are attached with pocket screws.The finish is minwax dark walnut and 4 coats of high gloss polyurethane.
HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Add your project.Shopping List: (10) 1"x4" x 96" common boards from Home Depot#8 x 2" wood screws1-1/4" Kreg pocket screws 2 inch screws1-1/4" Pocket Hole ScrewsElmer's Wood GlueElmer's Wood Filler120 grit sandpaperTools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesHearing ProtectionKreg JigDrillJigsawCompound Miter SawTable SawPower SanderGeneral Instructions: Please read through the entire plan and...