Dust Collection Cyclone Collectors Provide An Efficient And Effective Alternative To Conventional Dust Management Systems For Professional And Dedicated *M*T**R Woodworkers
Dust collection cyclone collectors provide an efficient and effective alternative to conventional dust management systems for professional and dedicated *m*t**r woodworkers is article about Magazine bookmarked by christian with ID 11407291696 was uploaded on 17-01-2019 and has been viewed 136,889 times.
Cyclone Dust Collection for a Small Shop Illustration by James Provost After expanding my shop and adding some additional machinery, I realized that I needed to upgrade my dust collection system.At the time my table saw and planer were connected to a shop-built cyclone dust collector, and I used a shop vacuum to collect dust at source from my other machines or other power tools as needed.
In this article I'll walk you through the process I followed in selecting and installing my shop's new cyclone dust collection system.The transition from an unhealthy and sometimes unsafe environment to one that's virtually dust-free and a joy to work in took a fair amount of research, somewhat more money than a shop built system, and a lot of hard work, but the end result was worth it.
Shop Layout - The Starting PointThe first step involved laying out a simple floor plan for my expanded shop.The shop is divided into two areas, a milling room, and a bench/finishing room.The cyclone was to be located in a small nook in the back of the milling room, and connected to the table saw and mitre saw, which would remain stationary, and to the jointer and...