Router Skills There Is More Than One Way To Build This Common Woodworking Element Here Are A Few Techniques To Try In Your Shop
Router skills there is more than one way to build this common woodworking element here are a few techniques to try in your shop is article about Magazine bookmarked by ralph with ID 11635833298 was uploaded on 03-04-2019 and has been viewed 170,872 times.
Raised Panel Doors Photos by Michael Kampen Wood is a hydroscopic material that will expand and contract as the relative humidity changes.This movement must be taken into account when constructing furniture.
Fail to account for this seasonal expansion and contraction and your panels will split and your joinery will fail.You may remember the article ('Dealing with Wood Movement', Jun/Jul '09, Issue #60), where the dangers of wood movement were discussed.
There are three elements in a frame and panel door: the center panel, the rails, and the stiles.An easy way to keep the rails and stiles straight is to remember that 'stiles' and 'sides' both start with 's'.
Each of these components can be made on the router table with the correct selection of bits.In this article I will outline the three methods I use most often in my shop.Panel raising options - You can choose from a back-cutting bit (1), a regular panel raising bit (2), or a vertical raising bit (3).
The Rails and StilesRail and stile bits are available in two forms, matched and reversible.When making a rail and stile door with a reversible bit, the end grain is cut first and then the cutters must...