Turning Jig At First Thought Accurately Making Segments For A Turned Segmented Bowl Seems Like A Tedious And Painful Task That S Not The Case Because A Special Mitre Sled Simplifies Cutting The Parts While Some Standard Supplies And A Simple Approach Are All You Need To Get The Bowl Blank Assembled And Ready For Turning
Turning jig at first thought accurately making segments for a turned segmented bowl seems like a tedious and painful task that s not the case because a special mitre sled simplifies cutting the parts while some standard supplies and a simple approach are all you need to get the bowl blank assembled and ready for turning is bookmark about Magazine bookmarked by samuel with ID 1895385603 was uploaded on 25-02-2019 and has been viewed 151,655 times.
Preparing a Blank for Segmented Turning Photos by Mike Jones I have tried just about every method to create segments using mitre saws and disc sanders.Now that I've figured out how to create a proper mitre sled for my table saw, I won't fiddle with any of that stuff anymore.
It can't be done any faster, safer or more accurately than with one of these sleds.Oh, and with less waste.What more could you want? The Table SawDon't be overwhelmed when I say we're going to do this on the table saw.
If the jig is made properly, this is the safest way I've seen to cut segments.The table saw doesn't have to be big and fancy, either.I've even done this with a jobsite table saw that was worth half as much as my mitre saw.
A mitre sled equipped with toggle clamps not only makes accurate, repeatable cuts, it also makes the task of cutting many tiny segments much safer for two main reasons: (1) There's much less chance of sending small pieces of wood into the air because the toggle clamps hold both the work piece and the off-cut, and (2) your fingers can stay a safe distance...