Finer Details Negative Space Is A Design Element That Is Fairly Simple To Create And Gives This Chair Its Identity
Finer details negative space is a design element that is fairly simple to create and gives this chair its identity is bookmark about Magazine bookmarked by philip with ID 14175268969 was uploaded on 18-04-2019 and has been viewed 428,395 times.
Create Negative Space Photos by Reed Hansuld The processes for creating the back and seat are similar.First I draw the piece full size so I can start to make the templates and forms.Both the two seat panels and two back panels are pressed over different shaped forms, yielding the two halves of each part.
The panels are made up of either resawn laminations or commercially cut thick veneers.For this chair I chose to resaw 3/32" laminations on the bandsaw.All of the panels were pressed using three layers of wood with Titebond 3 as the adhesive.
Prior to the gluing process, all of the laminations should be cut to rough size.Form and Clamps - A vacuum press is great for panels with a single curve in them, but they have a more difficult time with a double curve.
Hansuld chose to press the double-curved seat with a form and clamps.When pressing large panels out of solid wood or veneer, it is sometimes necessary to edge-join material to obtain a larger piece.This can be done by placing the pieces to be joined side-by-side and stretching a few pieces of masking tape across the joint.
Add one last str*p all...