Top Ten Cordless Drills Are Ubiquitous But Not Everyone Uses Them Correctly Here Are 10 Ways To Extend The Life Of Your Drill And Get It To Perform Better
Top ten cordless drills are ubiquitous but not everyone uses them correctly here are 10 ways to extend the life of your drill and get it to perform better is article about Magazine bookmarked by aaron with ID 1886852433 was uploaded on 07-01-2019 and has been viewed 194,375 times.
Top 10 Ways to get the Most from your Cordless Drill 1.Understand and use the torque selector switch - While using the 'Low' setting, the chuck rotates slower when the trigger is completely pulled, but with more torque.
The 'High' setting is used when there is less resistance from the drilling/driving operation, and you want a higher chuck RPM.I usually use the High setting and feather the trigger, and only switch to the Low setting when required.
2.Understand and use the clutch - The clutch tells the drill how much maximum power to transfer into the chuck, and will stop transferring power to the chuck if too much resistance is met.If you want to drive a series of small screws into soft material without sinking the scr*w head below the surface it's a good idea to use a very low chuck setting.
If you're driving large screws, or are drilling holes, use the highest setting, often marked with a twist drill bit.3.Purchase the right size/power of drill - If you're building small projects a big, powerful drill is going to be hard to manipulate, will cost more money and may even ruin the odd project if it's...