Easy Project Here Is An Easy To Build And Smart Looking Unit It Will Store All Those Messy Game Boxes Lying Around The Living Room Stuffed Into Various Drawers Or Scattered On Bookshelves
Easy project here is an easy to build and smart looking unit it will store all those messy game boxes lying around the living room stuffed into various drawers or scattered on bookshelves is post about Magazine bookmarked by curtis with ID 12223675880 was uploaded on 11-04-2019 and has been viewed 130,685 times.
Video Game Holder Illustration by James Provost; Lead illustration by Mike Del Rizzo I used cherry for the uprights and the top, mahogany plywood for the bases, and walnut for the base trim and the separator in the uprights.
I own an XBOX, so the measurements that I used are for that size storage box; adjust yours to suit.A Thick Top Gives Visual Weight• Mill a piece of 1" cherry for the top (A).This will give visual weight to the project.
If you don't have 1" stock you can glue together ¾" and ¼" pieces.• Cut mortises in the bottom side of the top to accommodate the uprights (B).The mortises are ¼" x ½" x 2 ¼".You can chop them out by hand, rout them, or use a mortiser.
• Install a 45o chamfer bit in the router table and cut a chamfer fi rst on the ends and then on the sides of the top piece.Any chipping on the end grain will be removed when you rout the sides.I used a 1 37⁄64" chamfer bit; select any bit that gives a pleasing edge profile.
Laminated Uprights Add Visual Interest• Mill the four pieces for the uprights (B) and...