Home Project This Sleek Modern Design Goes Well Just About Anywhere But The Overall Design Can Be Easily Adjusted By Changing Some Details A Different Style Of Lid Adding Some Texture To The Curved Sides Or Adjusting The Proportions Of The Box Will All Work Wonders When It Comes Time To Customize Your Box
Home project this sleek modern design goes well just about anywhere but the overall design can be easily adjusted by changing some details a different style of lid adding some texture to the curved sides or adjusting the proportions of the box will all work wonders when it comes time to customize your box is article about Magazine bookmarked by jim with ID 1627213198 was uploaded on 23-04-2019 and has been viewed 65,124 times.
Treasures And Trinkets INFO: DIFFICULTY - 2/5, LENGTH/TIME - 2/5, COST - 1/5,SPECIAL TOOLS - COVE CUTTING, GLASS ETCHING The curved sides of my box were created using a table saw technique called 'cove cutting'.
This method involves running a board diagonally across a table saw blade to form a cove down the middle.By changing the angle of approach you can alter the width of the cove.If you're really adventurous, you can even modify the symmetry of the curve by tilting the blade.
If you don't want to simply experiment with the setup geometry, and see what you end up with, the easiest way to work out the details is to use one of the many calculators found online.Search for 'cove cut calculator' to locate the online utility that works best for you.
The calculator I downloaded determined that the angle of approach needed to be 20° to create the 5" wide by 3/4" deep cove required for this project.This calculation is based on the assumption that a 10" diameter saw blade is being used to remove the material.
Get started by breaking out a 5-1/2" wide by 24" long blank for the sides.After machining the cove, I will rip...