Kitchen project is article about Magazine bookmarked by shane with ID 14270422663 was uploaded on 05-01-2019 and has been viewed 306,571 times.
Potato Bin Illustration by Lee Gabel Here is a handy bin for storing potatoes, onions and garlic.Unless otherwise stated, all stock is 3/4" thick.Don't use pressure treated lattice for the back and bottom, as it presents a health hazard.
You'll have to construct your own lattice, but don't worry, it's quite easy.The sides measure 8" by 22".Place a mark on the front of each side board at 19 3/4" from the bottom, and on the top of each side board, 1" in from back.
Connect the two lines, and then cut a slope.The front measures 15" by 16".I glued mine from two 7 1/2" by 16" boards.Make two lattices, one 14 1/2" by 18" for the back and the other 14 1/2" by 7 3/4" for the bottom.
This will allow air to circulate and keep your veggies from spoiling.Use 1" by 2" stock for the frame, and 1/4" by 1 1/4" stock for the strips.Glue and scr*w the first str*p from the top right corner of your frame to the bottom left corner.
Use one of the strips as a spacer when installing the rest of the strips.Trim off any strips that extend...