Wooden Puzzle The Object Of This Puzzle Is To Open The Jailhouse By Removing Two Bars
Wooden puzzle the object of this puzzle is to open the jailhouse by removing two bars is article about Magazine bookmarked by perry with ID 11725215949 was uploaded on 21-02-2019 and has been viewed 288,492 times.
Jailhouse Cut out two circles of solid wood 6-3/4" in diameter, for the top and bottom.Find the centre of the bottom and the top and from that centre make a circle with a 2 3/4" radius.This circle will act as the centre for the bars.
Mark a bar centre every 30o on the circle.(If you do not have a 60/30o set square, use a protractor, to measure the 30o).Drill 1/2" holes, 1/4" deep at all the bar locations.For the locking bar, drill straight through the bottom and in 5/8" on the top.
For the slip-out bars, drill straight through the two holes in the bottom.Fit the bottom to the base with a 1" machine bolt, countersunk.Tighten the nut so that the bottom will turn freely but snug.Peen (flatten) the end of the bolt so that the nut will never loosen.
Plug the bottom and base to hide bolt.Drill through the locking bar hole into the base 1/2" deep.Cut the dowels to the length shown in the materials list.Assemble the jailhouse without glue to make sure everything fits together as it should.
The slip-out bars will have to be tapered slightly at the bottom so that they will swing out past the top...