Intarsia Project Canadian Woodworking Magazine Is Puttin On The Ritz With This Their First All Gloss Issue
Intarsia project canadian woodworking magazine is puttin on the ritz with this their first all gloss issue is bookmark about Magazine bookmarked by alex with ID 1862334930 was uploaded on 19-01-2019 and has been viewed 272,388 times.
Puttin' on the Ritz I felt that this all-new, upscale look deserved a project appropriate to the event, so 'Puttin' on the Ritz' came to mind.This Koala bear is looking every bit the part - dressed in top hat and tails! 'Puttin' on the Ritz' is a basic intarsia project.
Special attention to shaping will give it a real teddy bear look.This project has 50 pieces and when finished is about 20" tall and 12 ½" wide.MaterialStart with ¾" material and raise or lower as required.
Suggestions for LT or DK shades are relative to each other.Just find cedar that is DK, MD or LT when compared to each other.Choose the woods carefully, as this is a very creative step.The woods you choose will make the project uniquely yours.
I used a few unique woods in this project.The vest is palm wood.Palm is actually a grass plant, but has the properties of wood.The vest pockets are snake wood.The two work well together.Although these are the woods that I chose, you don't have to use these woods.
Eye maple would also look good as a vest.Transfer the PatternTransfer the pattern to the wood, by whichever...