Decor project is bookmark about Magazine bookmarked by christopher with ID 14007962399 was uploaded on 16-03-2019 and has been viewed 297,300 times.
Fireplace Screen Illustration by Mike Del Rizzo I use pine to build my screens because it is easy to cut with my scroll saw or jigsaw.Begin by planing the pine boards to 1/2" thickness.Then cut the two sides and middle panels to the lengths you will need.
Cut the top curved edges with a scroll saw.The two side panel patterns are each made up of pattern A and pattern C.The centre panel pattern is made up of pattern A and pattern B.Trace the patterns onto the appropriate panels and cut them with a jigsaw or scroll saw.
I used a Canadian Tire Spin Saw and it did an excellent job.Cut two lengths of the 3" wide piece to fit the length of the two edges of the middle panel.Glue them in place using dowels or biscuits.Sand all the pieces and cut out the edges to a smooth surface.
Screw hinges on the back side of the middle and side pieces about 5" from the bottom and 5" from the top of the longest side.To finish the screen I apply one coat of Minwax Pre-Stain Conditioner, followed by one coat of Minwax Cherry Stain, because it gives a...