Home Project The Original Medicine Cabinet Was Made Of Wood Or Metal And Was A Place Where Grandma Stored Her Health Remedies The Reason Medicine Cabinets Are Put In The Bathroom Instead Of The Kitchen Is Not Known Today We Find The Bathroom Location Very Convenient For Storing All Manner Of Toiletries Cosmetics And Of Course Medicines While They Are Often Mounted On The Wall Medicine Cabinets Can Also Be Recessed Into The Wall Between The Studding
Home project the original medicine cabinet was made of wood or metal and was a place where grandma stored her health remedies the reason medicine cabinets are put in the bathroom instead of the kitchen is not known today we find the bathroom location very convenient for storing all manner of toiletries cosmetics and of course medicines while they are often mounted on the wall medicine cabinets can also be recessed into the wall between the studding is post about Magazine bookmarked by ralph with ID 11714327519 was uploaded on 10-01-2019 and has been viewed 34,782 times.
Medicine Cabinet Illustrations by Mike Del Rizzo This cabinet is easy to build and has nice clean lines.You can build it in a few hours with a minimum of tools.I used two ¾" x 16" x 96" knotty pine boards from my local building supply store.
Such boards are already planed to the right thickness and are quite inexpensive.When selecting wood for shelving look for the flattest boards you can find.You might find it more convenient to do your initial sanding with 150 grit sandpaper on both sides of the boards before cutting them to size.
Of course, you can substitute any wood that strikes your fancy.(Note: If you can't find 16" pine boards you can buy 9" boards and glue them together).The Box• Lay your boards on a workbench and mark out the parts for the sides (A), divider (B), the inner top and bottom (C), and outer top and bottom (D).
• Cut the seven pieces for the box to size.• Cut ½" x ¾" rabbets on the back of each side piece (A).You can do this on your table saw or on your router table.Easy Build• Mark out and drill 5mm holes for the...