Easy project is bookmark about Magazine bookmarked by ted with ID 11791836811 was uploaded on 07-02-2019 and has been viewed 352,151 times.
Skateboard Deck Here's a chance to try something a little different.No square stock, no crisply executed joinery and, although there is a lot of gluing up of material, you don't need a rack of expensive clamps.
This is a great project to involve younger members of the family and share some quality time in the shop.The skateboard deck featured here is built from a kit produced by Toronto based Roarockit Skateboard Company.
The kit comes with everything you need to build a deck: materials, supplies and tools.Even if you don't have a workshop you can still build this on your kitchen table.The skateboard deck is made of seven layers of maple veneer that are glued up using a form in a vacuum veneering bag.
The maple veneer is cut to shape and already punched with the holes for the fasteners that hold the wheel assembly in place.Begin by identifying the first three layers of veneer.They are all identified and stamped with a directional arrow.
Use some painter's tape to mask off the edges and the punched holes on the top surface of the top layer on the deck.Turn the slice over and trim the tape with a knife.With the...