Furniture Project Templates And Jigs Are The Key To Tackling The Different Curves On This Cherry Table
Furniture project templates and jigs are the key to tackling the different curves on this cherry table is article about Magazine bookmarked by joshua with ID 12711354724 was uploaded on 14-01-2019 and has been viewed 295,889 times.
Build an Elegant End Table Photos by David Bedrosian; Illustration by Len Churchill INFO: DIFFICULTY - 4/5, LENGTH/TIME - 4/5, COST - 3/5, SPECIAL TECHNIQUES - WORKING WITH CURVES I chose a size of 29" by 21" for the top of this table, but you could scale it up if you want to make a coffee table.
I wanted the top to overhang the oval apron by 1-3/4", which meant the outside dimensions of the apron should be 25-1/2" by 17-1/2".To make the apron sufficiently strong, I made it 1-1/4" thick and 2-5/8" high.
The 17" long curved and tapered legs are 1-1/2" square at the top and approximately 1" square at the bottom.I found this leg size to work well for both this end table and larger coffee table.Rout three MDF templatesThe 1/2" thick MDF templates for the top and apron can be cut using any of a number of ways, but my preferred method is with a shop-built elliptical router jig.
Make a 1/4" MDF template of the curved face of the leg.Note the upper 2-3/4" of the leg should remain straight and square since that portion will be joined to the apron.It's worth spending a little extra time sanding the...